ICHIBA V2 WHEEL SPACERS: ACURA/HONDA (5:114.3/64.1 BORE) 15mm

 

Ichiba Version II 15mm wheel spacer for Acura / Honda (5:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Integra Type R 97-01, RSX 02-06, NSX 91-05 (Rear), RL/TL 96-03, TSX 02-07, MDX 01-06, RDX 07-08; Honda Accord 98-02, Prelude 97-01, Odyssey 95-04, CRV 97-05, S2000 00-07 (Rear)
Note: Sold as a pair.

 

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Every spacer is a two piece design with pressed studs. Spacers bolts onto the existing studs. These are hubcentric spacers that is vehicle specific; will fit onto your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Note: Must check the wheels have open slots or cavities when you are going to purchase Version II 15MM Wheel spacers.
If your wheels are solid surface, we highly recommended to purchase Version I 15MM Wheel spacers, otherwise the OEM studs must be shortened so that your wheels can sit flush against the spacers!