Our B-Series wire harness offers Mil-Spec Teflon coated wire with a maximum heat rating of 200°C . The Teflon coated wire is loomed with The highest quality Raychem DR-25 heat shrink covering, and adhesive lined wire junctions to keep moisture out. Each connector is crimped with pneumatic heads to ensure an OEM crimp every time, then tagged with a yellow identification labels for easy installation. All heavy interference circuits are protected and grounded with proper wire covering.
Our Mil-Spec harnesses are 100% quality tested pin to pin, and resistance checked to ensure no voltage fluctuations. These are the best harnesses money can buy.
Rywire also offers a Firewall mounted Mil-Spec connector that will allow easy engine removal for quick engine changes and customization. It can be added to any Mil-Spec wire harness for a small charge.
All Rywire Mil-Spec wire harnesses are made with OBD1 (92-95) ECU Connectors attached, please inquire about obd2 ecu harnesses and jumpers.
Rywire Mil-Spec wire harnesses are made with both OBD1 and obd2 component connector styles. Both styles available. I.E. OBD1 Alternator, Injectors, and Distributor connectors. As well as OBD2 Alternator, Injector and Distributor connectors.
Each harness will come with a custom back side sub-harness that will be proprietary to the chassis you choose on the drop down menu. This way if you ever change chassis you will only need a new sub-harness, not a whole new wire loom!
If you're looking for a custom harness or option you can't find online, give us a call!
HARNESS CONNECTOR LIST:
- oil pressure sending unit
- knock sensor
- intake air temperature (intake manifold style)
- oxygen sensor
(primary 4 wire) - alternator
- 2 extra wires
- injector 1-4
- map
- tps
- idle control motor
| - electronic speed sensor
- ground
- fan switch
- distributor
- h20 sending unit
(for gauge cluster) - reverse lights
- engine coolant temp
- starter signal
- vtec solenoid`
- ecu plugs A,B,D
- power distribution cap
|
Attention Accord and Prelude owners:
We may need to borrow your stock Prelude/Accord engine harness for reference of the shock tower configuration to complete your harness. This allows for the easy installation we are known for. Some models we have specs for, but the Prelude and Accord models vary so much that we would rather be 100% certain it's an exact match by having your harness to compare to.
