Latest Products in Stores

MEGAN RACING M-DT STYLE MUFFLER: DUAL 3" TIPS / 2.5" INLET - $ 115.99

MEGAN RACING M-DT STYLE MUFFLER: DUAL 3" TIPS / 2.5" INLET

PRICE :$ 115.99
With law enforcment becoming ever more strickt with modifying your vehicle with performance parts, the need for more discreet performance parts have increased to keep a low profile.

The M-DT is designed with a more conservative Oval design rather than the common Canister style universal mufflers. These are more discreet to law enforcment and although the feature the same perforated-core design as the Canister mufflers that we sell, they offer a deeper more mellow tone due to the increased amount of packing that is contained within the MUFFLER casing.

Spec:

- Dual 3" tips, 2.5" inlet

- 100% sus 304 stainless steel

- Silver Chrome finish

- Sound is quiet and deep tone

- Universal

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

MEGAN RACING M-DF STYLE MUFFLER: DUAL 3.5" TIPS / 2.25" INLET - $ 113.50

MEGAN RACING M-DF STYLE MUFFLER: DUAL 3.5" TIPS / 2.25" INLET

PRICE :$ 113.50
The dual canister, dual 3.5" tips and dual silencers makes this M-DF a very unique MUFFLER . You won t see the dual 3.5" silencers on the streets all the time, making this Muffler very special. The M-DF looks and performs well whether it be a race car, a 4 door, or an everday driven car. This muffler will gain better response on higher RPM, and with silencers on, will reduce the loudness approximately 20-30%.

Spec:

- Dual 3.5" tips with dual silencers, 2.25" inlet, total lenght 21" and body width 9"
- 100% sus 304 stainless steel
- Silver Chrome finish
- Strong and deep tone
- Universal

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

MEGAN RACING OE-STYLE TURBO MUFFLER: 3.5" TIP / 3" INLET - $ 109.99

MEGAN RACING OE-STYLE TURBO MUFFLER: 3.5" TIP / 3" INLET

PRICE :$ 109.99
With law enforcment becoming ever more strickt with modifying your vehicle with performance parts, the need for more discreet performance parts have increased to keep a low profile.

The M-OE is designed with a more conservative Oval design rather than the common Canister style universal mufflers. These are more discreet to law enforcment and although the feature the same perforated-core design as the Canister mufflers that we sell, they offer a deeper more mellow tone due to the increased amount of packing that is contained within the MUFFLER casing.

Spec:

- 3.5" tip w/silencer, 3" inlet, total lenght 18" and Body width 10", and 6.5" high.

- 100% sus 304 stainless steel

- Silver Chrome finish

- Strong and deep tone

- Universal

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

MEGAN RACING N1 STYLE MUFFLER: 4" TIP / 2.5" INLET - $ 78.99

MEGAN RACING N1 STYLE MUFFLER: 4" TIP / 2.5" INLET

PRICE :$ 78.99
The M-N1 comes with a DOUBLE LAYER silencer that is able to reduce the loudness 30%. This MUFFLER gains better response on higher RPM. We also have 3" turbo inlet available for this model.

Spec:
- 4" tip, 2.5" inlet, total lenght 19.5" and body width 5.5".
- Removable double layer silencer in BLACK.
- 100% sus 304 stainless steel
- Silver Chrome finish
- Strong and deep tone
- Universal

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLOX UNIVERSAL RACE MUFFLER: 3" INLET - $ 109.99

BLOX UNIVERSAL RACE MUFFLER: 3" INLET

PRICE :$ 109.99

BLOX Racing - Universal Race Muffler, 3.0" inlet diameter, 3.0" tip diameter; 9.5"L, T-304 Stainless steel, Ultra lightweight, compact

BLOX Racing offers universal mufflers in two configurations; high performance and race. Both are manufactured from T-304 stainless steel and robotically TIG-welded.

Universal race mufflers are ultra lightweight and compact. These units offer serious performance while meeting sanctioning body requirements for mufflers. Race mufflers are available in 2.5" and 3.0". Each tip measures 3.0

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TANABE HYPER SPEC UNIVERSAL MUFFLER: 60mm INLET -100MM TIP - $ 214.99

TANABE HYPER SPEC UNIVERSAL MUFFLER: 60mm INLET -100MM TIP

PRICE :$ 214.99

Tanabe Hyper Spec Universal Muffler
(60mm Piping, Hyper Style Muffler, 100mm Tip) in Polished Stainless Steel

Tanabe is introducing the alternative to their current line-up of exhaust systems. A universal RACING spec and Hyper spec is available for those that need the versatility for custome applications. The Racing spec have the signature Racing Spec style and features a fully polished stainless steel muffler and includes a special Tanabe placard to show authenticity. A baffle is included for tunable sound. The Hyper spec includes a full stainless steel muffler and tip

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY SUPER LIGHT SHIFT KNOB: NISSAN/MITSUBISHI/MAZDA - $ 25.99

GREDDY SUPER LIGHT SHIFT KNOB: NISSAN/MITSUBISHI/MAZDA

PRICE :$ 25.99

GReddy Performance Products Super Light Shift Knob for most Nissan, Mitsubishi, & Mazda - (M10 P1.25)

This shift knob is super light and inexpensive. Made from White Delrin plastic, it weighs only 2oz. That is about 1/3 of most conventional knobs. The white ball shaped knob also comes with three GReddy shift badges. (standard 5 speed shift pattern, Red, White & Blue)

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY SUPER LIGHT SHIFT KNOB: TOYOTA/SUBARU - $ 25.99

GREDDY SUPER LIGHT SHIFT KNOB: TOYOTA/SUBARU

PRICE :$ 25.99

GReddy Performance Products Super Light Shift Knob for most Toyota & Subaru - (M12 P1.25)

This Shift knob is super light and inexpensive. Made from White Delrin plastic, it weighs only 2oz. That is about 1/3 of most conventional knobs. The white ball shaped knob also comes with three GReddy shift badges. (standard 5 speed shift pattern, Red, White & Blue)

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY SUPER LIGHT SHIFT KNOB: HONDA/ACURA - $ 25.99

GREDDY SUPER LIGHT SHIFT KNOB: HONDA/ACURA

PRICE :$ 25.99

GReddy Performance Products Super Light Shift Knob for most Honda/Acura - (Type C - M10 P1.50)

This Shift Knob is super light and inexpensive. Made from White Delrin plastic, it weighs only 2oz. That is about 1/3 of most conventional knobs. The white ball shaped knob also comes with three Greddy shift badges. (standard 5 speed shift pattern, Red, White & Blue)

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 25mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE) - $ 129.99

ICHIBA VERSION II 25mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE)

PRICE :$ 129.99

Ichiba Version II 25mm wheel Spacer for Infiniti / Nissan (4:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti G20 91-96; Nissan 240SX 89-98 (4 Lug)
Note: Sold as one pair (2pcs) with 8pcs nuts

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 20mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE) - $ 129.99

ICHIBA VERSION II 20mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE)

PRICE :$ 129.99

Ichiba Version II 20mm wheel spacer for Infiniti / Nissan (4:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti G20 91-96; Nissan 240SX 89-98 (4 Lug)
Note: Sold as one pair (2pcs) with 8pcs nuts

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 15mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE) - $ 129.99

ICHIBA VERSION II 15mm WHEEL SPACER: INFINITI/NISSAN (4:114.3 / 66.2 BORE)

PRICE :$ 129.99

Ichiba Version II 15mm wheel spacer for Infiniti / Nissan (4:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti G20 91-96; Nissan 240SX 89-98 (4 Lug)
Note: Sold as one pair (2pcs) with 8pcs Nuts with one special socket

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 25mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE) - $ 138.59

ICHIBA VERSION II 25mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE)

PRICE :$ 138.59

Ichiba Version II 25mm wheel Spacer for Infiniti / Nissan (5:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti FX35, FX45, G35, I35, I30, J30, M30, M35, M45, Q45; Nissan Altima, Maxima, Murano, 350Z, 240SX 95-98, 300ZX
Note: Sold as a pair.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 20mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE) - $ 138.59

ICHIBA VERSION II 20mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE)

PRICE :$ 138.59

Ichiba Version II 20mm wheel Spacer for Infiniti / Nissan (5:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti FX35, FX45, G35, I35, I30, J30, M30, M35, M45, Q45; Nissan Altima, Maxima, Murano, 350Z, 240SX 95-98, 300ZX
Note: Sold as a pair

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 15mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE) - $ 138.59

ICHIBA VERSION II 15mm WHEEL SPACER: INFINITI/NISSAN (5:114.3 / 66.2 BORE)

PRICE :$ 138.59

Ichiba Version II 15mm wheel spacer for Infiniti / Nissan (5:114.3 / 66.2 Bore / 12x1.25 Thread Type)
for Infiniti FX35, FX45, G35, I35, I30, J30, M30, M35, M45, Q45; Nissan Altima, Maxima, Murano, 350Z, 240SX 95-98, 300ZX
Note: Sold as a pair.

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Every spacer is a two piece design with pressed studs. Spacers bolts onto the existing studs. These are hubcentric spacers that is vehicle specific; will fit onto your vehicle's original Hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Note: Must check the wheels have open slots or cavities when you are going to purchase Version II 15MM Wheel spacers.
If your wheels are solid surface, we highly recommended to purchase Version I 15MM Wheel spacers, otherwise the OEM studs must be shortened so that your wheels can sit flush against the spacers!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 20mm WHEEL SPACER: ACURA/HONDA (5:114.3 / 64.1 BORE) - $ 135.89

ICHIBA VERSION II 20mm WHEEL SPACER: ACURA/HONDA (5:114.3 / 64.1 BORE)

PRICE :$ 135.89

Ichiba Version II 20mm wheel Spacer for Acura / Honda (5:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Integra Type R 97-01, RSX 02-06, NSX 91-05 (Rear), RL/TL 96-03, TSX 02-07, MDX 01-06, RDX 07-08; Honda Accord 98-02, Prelude 97-01, Odyssey 95-04, CRV 97-05, S2000 00-07 (Rear)
Note: Sold as a pair.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 15mm WHEEL SPACER: ACURA/HONDA (5:114.3 / 64.1 BORE) - $ 135.89

ICHIBA VERSION II 15mm WHEEL SPACER: ACURA/HONDA (5:114.3 / 64.1 BORE)

PRICE :$ 135.89

Ichiba Version II 15mm wheel spacer for Acura / Honda (5:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Integra Type R 97-01, RSX 02-06, NSX 91-05 (Rear), RL/TL 96-03, TSX 02-07, MDX 01-06, RDX 07-08; Honda Accord 98-02, Prelude 97-01, Odyssey 95-04, CRV 97-05, S2000 00-07 (Rear)
Note: Sold as a pair.

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Every spacer is a two piece design with pressed studs. Spacers bolts onto the existing studs. These are hubcentric spacers that is vehicle specific; will fit onto your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Note: Must check the wheels have open slots or cavities when you are going to purchase Version II 15MM Wheel spacers.
If your wheels are solid surface, we highly recommended to purchase Version I 15MM Wheel spacers, otherwise the OEM studs must be shortened so that your wheels can sit flush against the spacers!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 20mm WHEEL SPACER: ACURA/HONDA (4:114.3 / 64.1 BORE) - $ 135.89

ICHIBA VERSION II 20mm WHEEL SPACER: ACURA/HONDA (4:114.3 / 64.1 BORE)

PRICE :$ 135.89

Ichiba Version II 20mm wheel spacer for Acura / Honda (4:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Legend 86-90, CL 96-02, TL 2.5L 96-98; Honda Accord 90-97, Prelude 92-96
Note: Sold as a pair.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 15mm WHEEL SPACER: ACURA/HONDA (4:114.3 / 64.1 BORE) - $ 135.89

ICHIBA VERSION II 15mm WHEEL SPACER: ACURA/HONDA (4:114.3 / 64.1 BORE)

PRICE :$ 135.89

Ichiba Version II 15mm wheel Spacer for Acura / Honda (4:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Legend 86-90, CL 96-02, TL 2.5L 96-98; Honda Accord 90-97, Prelude 92-96
Note: Sold as a pair.

Version II wheel spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. Every Spacer is a two piece design with pressed studs. Spacers bolts onto the existing studs. These are hubcentric spacers that is vehicle specific; will fit onto your vehicle's original Hub perfectly without any gap. Wheel spacers move the wheel out from the Hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Note: Must check the wheels have open slots or cavities when you are going to purchase Version II 15MM Wheel spacers.
If your wheels are solid surface, we highly recommended to purchase Version I 15MM Wheel spacers, otherwise the OEM studs must be shortened so that your wheels can sit flush against the spacers!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA VERSION II 25mm WHEEL SPACER: HONDA/ACURA (5:114.3 / 64.1 BORE) - $ 135.89

ICHIBA VERSION II 25mm WHEEL SPACER: HONDA/ACURA (5:114.3 / 64.1 BORE)

PRICE :$ 135.89

Ichiba Version II 25mm wheel spacer for Acura / Honda (5:114.3 / 64.1 Bore / 12x1.5 Thread Type)
for Acura Integra Type R 97-01, RSX 02-06, NSX 91-05 (Rear), RL/TL 96-03, TSX 02-07, MDX 01-06, RDX 07-08; Honda Accord 98-02, Prelude 97-01, Odyssey 95-04, CRV 97-05, S2000 00-07 (Rear)
Note: Sold as a pair

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA 10mm WHEEL SPACER: ACURA / HONDA (5:114.3 / 64 BORE) - $ 101.50

ICHIBA 10mm WHEEL SPACER: ACURA / HONDA (5:114.3 / 64 BORE)

PRICE :$ 101.50

Ichiba 10mm wheel spacer for Acura / Honda 5:114 / 64.1 Bore
for Acura Integra Type-R 97-01, RSX 02-06, NSX 91-05 (Rear Only), 3.5RL, 3.5TL, TSX 04-07; Honda Accord 94-02 (5-Lug), Prelude 97-01, Odyssey, Passport, CRV, S2000 (Rear Only), Element 03-06
Note: Sold as a pair

- Full polished hubcentric aluminum wheel spacer
- Wheel Spacer Move The Wheel Out From Hub
- Longer Studs & Lug Nuts Available
- Super Light Weight Design
- OEM Fitment & Direct Bolt-On

Wheel Spacers are made from Aluminum/Magnesium alloy. They are incredibly strong and very lightweight. These are hubcentric spacers that is specifically made to each vehicle; will fitted on your vehicle's original hub perfectly without any gap. Wheel spacers move the wheel out from the hub, effectively widening the stance of the vehicle and lowering its roll center. This simple modification increases lateral stability, which in turn provides improved handling & greater safety.

Bolt Pattern: 5/114.3
Center Bore: 64.1
Thread: 12x1.5
Longer Studs Included

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TAKEDA SHORT RAM INTAKE: IS250/IS350 06-09 - $ 209.99

TAKEDA SHORT RAM INTAKE: IS250/IS350 06-09

PRICE :$ 209.99
Retain is the Takeda Short Ram lineup. These intakes create simple, bolt-on horsepower that requires simple, Quick installation and no bumper removal. Some of the short ram intakes include a wrinkle black heat shield.

Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

INJEN SHORT RAM INTAKE: IS350 06-08 - $ 241.50

INJEN SHORT RAM INTAKE: IS350 06-08

	PRICE :$ 241.50 Injen Short Ram Intake For Lexus IS350 06-08 Note: Available in powder coated black or polished aluminum piping. Please select color when ordering Injen now brings quality, power and prestige to the air intake system for the LExus IS350 Exclusively designed for this Lexus executive model, the SP 2092 provides the quality response and power gains of up to 19 HP / 17 ft. lbs of torque. A completely bolt-in system is available in either polish or black powder coat for that look of excellence. KEY FEATURES: - Features Patent Pending MR Technology Process - Includes INJEN Power Bands for secure fit - Includes Billet Aluminum Dyno Tuned Mass Air Flow Sensor Adapter - Gains of up to 19 hp and 17 ft.lbs of torque - Avaliable in Mirror Polish or Black Powder Coat Finish
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

INJEN SHORT RAM INTAKE: IS250 2006-UP - $ 228.69

INJEN SHORT RAM INTAKE: IS250 2006-UP

	PRICE :$ 228.69 Injen - Short Ram INTAKE System, For Lexus IS250 2006-Up Note: Available in Powder Coated Black or Aluminum Polished Piping. Please select color when ordering Injen introduces its Mega Ram Technology (MR Tech.). This whopping 3.5 system pressurizes airflow throughout our Dual Step Process. Out perform the rest with a reliable gain of up to11 hp and 8 ft/lbs of torque. Available in Polish or Black Powder Coat. KEY FEATURES: - Features MR Technology - Pressurize air flow - Dual Step Process - Gains of up to 11 hp and 8 ft/lbs of torque
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

FUJITA SHORT RAM INTAKE: CIVIC 92-95 (LX/DX/EX/SI) - $ 129.99

FUJITA SHORT RAM INTAKE: CIVIC 92-95 (LX/DX/EX/SI)

PRICE :$ 129.99
A traditional underhood intake, also known as a Short Ram Intake, usually follows the same path as the stock intake system. There are some distinct differences between the stock intake and the Fujita Air Short Ram. A few of these differences include replacing the factory intake plenum with an aluminum plenum, eliminating resonators, air box, drop in filter, and replacing it with an open filter element. These key differences allow the vehicle to bring in more air into the intake chamber and create more horsepower and torque. Vacuum and in some cases air mass sensors, are still maintained and incorporated into the Fujita Short Ram Intake. Since a vehicle is constantly moving (except during traffic or at a light) heat soak will be of little issue since the car will constantly be bringing in fresh air. In addition, studies have shown that the material used to build the intake system has shown no loss of horsepower due to an intake being rubber, aluminum, ceramic coated, anodized, etc.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

K&N TYPHOON INTAKE: ACCORD V6 2008 (SILVER) - $ 258.99

K&N TYPHOON INTAKE: ACCORD V6 2008 (SILVER)

PRICE :$ 258.99

Estimated Horsepower Gain: 10.23 HP @ 5217 RPM

The Typhoon Air INTAKE System is a free-flowing mandrel-bent aluminum tube induction system designed to provide cooler, denser air to the engine for increased performance. It is a direct replacement for the restrictive OE air box and the constrictive factory air Filter and inlet tract. Using the most advanced airflow management technology, K&N has optimized the flow characteristics of the Typhoon Air Intake System to complement its high-flow Filtercharger®.

Designed to fit most sport compact performance vehicles, Typhoon Air Intake Systems are available in three or four distinctive finishes: powdercoated sparkled red, blue, silver; and brightly polished aluminum. All Typhoon Air Intake Systems come with a reusable conical K&N Filtercharger® Element backed by the company's exclusive Million Mile Limited Warranty. All Typhoon Air Intake Systems come complete with installation hardware and step-by-step installation instructions, perfect for the do-it-yourselfer.

Note-1: All CCA Systems can be Converted to SR (Short Ram) Systems.
Note-2: Drychargers are included in all Cold-Air intake systems. Provides added protection by repelling water from entering the intake tract.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ARC TITANIUM HOOD PANEL: LANCER EVO 03-05 - $ 244.20

ARC TITANIUM HOOD PANEL: LANCER EVO 03-05

PRICE :$ 244.20
The ARC Titan Hood Panel (Radiator Shroud) forces more air through the radiator to reduce Engine temperature. Due to some air will escape through the top and bottom of the radiator, it will limit the efficiency of the radiator. ARC hood panel fits over the top of the core support and the radiator. It helps blocking the air escape over the radiator. This simple bolt-on piece will increase performance and will accent your engine bay. ARC hood panel is made of Titanium with polished surface for lightweight and corrosion resistance.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY CARBON AIR DIVERSION PLATE: SENTRA SPEC V (BLACK) - $ 162.50

GREDDY CARBON AIR DIVERSION PLATE: SENTRA SPEC V (BLACK)

PRICE :$ 162.50

GReddy Performance Product - Black Carbon Air Diversion Plate (Radiator Shroud), for Nissan Sentra Spec V 02-06

Made from 1mm carbon fiber and embossed with the GREDDY logo, the Air Diversion Panel is designed not to only improve the look of the engine, but to contain airflow to the radiator core, thus, improving cooling efficiency

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY CARBON AIR DIVERSION PLATE: 350Z 03-06 (BLACK) - $ 169.99

GREDDY CARBON AIR DIVERSION PLATE: 350Z 03-06 (BLACK)

PRICE :$ 169.99

GReddy Performance Product - Black Carbon Air Diversion Plate (Radiator Shroud) for Nissan 350z 03-06

Made from 1mm carbon fiber and embossed with the Greddy logo, the Air Diversion Panel is designed not to only improve the look of the engine, but to contain airflow to the radiator core, thus, improving cooling efficiency.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

GREDDY CARBON AIR DIVERSION PLATE: INTEGRA 94-01 (BLACK) - $ 149.99

GREDDY CARBON AIR DIVERSION PLATE: INTEGRA 94-01 (BLACK)

PRICE :$ 149.99

GReddy Performance Product - Black Carbon Air Diversion Plate (Radiator Shroud), for Acura Integra 94-01

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLOX RADIATOR BRACKET: CIVIC/INTEGRA - $ 19.99

BLOX RADIATOR BRACKET: CIVIC/INTEGRA

	PRICE :$ 19.99 For Acura Integra 94-01; Honda Civic EX 92-00 & S2000 00-UP Replace your factory radiator bracket with the BLOX Racing Radiator Stay. Each bracket is CNC-machined from high-grade aluminum for strength and anodized for durability
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 LICENSE PLATE FRAME: GO FASTER - $ 7.99

SKUNK2 LICENSE PLATE FRAME: GO FASTER

PRICE :$ 7.99
This is the perfect additional to let everyone behind you know that you are avid SKUNK2 Racer!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 LICENSE PLATE FRAME: LIVE THE DREAM - $ 7.99

SKUNK2 LICENSE PLATE FRAME: LIVE THE DREAM

PRICE :$ 7.99
This is the perfect additional to let everyone behind you know that you are avid Skunk2 Racer!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ENERGY SUSPENSION HYPER-FLEX SYSTEM: 240SX 89-94 - $ 165.80

ENERGY SUSPENSION HYPER-FLEX SYSTEM: 240SX 89-94

	PRICE :$ 165.80 Energy Suspension, Hyper-Flex System (Master Set), for Nissan 240SX 89-94 (with 27mm front and 16mm rear Sway bar bushings) Note: Available in Graphite (Black) or Red color. Please select color when ordering. Back by popular demand! ENERGY SUSPENSION reintroduces the HYPER-FLEX SYSTEM Performance Bushing Master Sets-for most popular car and truck models, both import and domestic. Now, with just one part number you can replace all of the major suspension bushing components with HYPER-FLEX performance polyurethane. By installing a complete set of ENERGY's performance polyurethane bushings you'll realize an incredible improvement in control-no matter what demand you put on your vehicle. ENERGY's control arm bushings will maintain proper caster and camber alignment throughout the suspension travel, without binding. The leaf spring bushings will deliver an increase in handling and control and greatly reduce wheel hop on quick acceleration. Even braking control is improved through better suspension stability. This set includes front and rear control arm bushings, front strut rod bushings, front and rear sway bar bushings, tie rod end boots
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ENERGY SUSPENSION HYPER-FLEX SYSTEM: 240SX 95-98 - $ 164.99

ENERGY SUSPENSION HYPER-FLEX SYSTEM: 240SX 95-98

	PRICE :$ 164.99 Energy Suspension - Hyper-Flex System (Master Set), for Nissan 240SX 95-98 (with 27mm front and 16mm rear Sway bar bushings) Note: Available in Graphite (Black) or Red color. Please select color when ordering Back by popular demand! ENERGY SUSPENSION reintroduces the HYPER-FLEX SYSTEM Performance Bushing Master Sets-for most popular car and truck models, both import and domestic. Now, with just one part number you can replace all of the major suspension bushing components with HYPER-FLEX performance polyurethane. By installing a complete set of ENERGY's performance polyurethane bushings you'll realize an incredible improvement in control-no matter what demand you put on your vehicle. ENERGY's control arm bushings will maintain proper caster and camber alignment throughout the suspension travel, without binding. The leaf spring bushings will deliver an increase in handling and control and greatly reduce Wheel hop on quick acceleration. Even braking control is improved through better suspension stability. This set includes front and rear control arm bushings, front strut rod bushings, front and rear sway bar bushings, tie rod end boots.
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ENERGY SUSPENSION HYPER-FLEX SYSTEM: RSX 02-06 - $ 125.40

ENERGY SUSPENSION HYPER-FLEX SYSTEM: RSX 02-06

	PRICE :$ 125.40 Energy Suspension Hyper-Flex System (Master Set) for Acura RSX (Including Type-S) 02-06 HYPER-FLEX SYSTEM Performance Bushing Master Sets-for the most popular car and truck models, both import and domestic. Now, with just one part number you can replace all of the major suspension bushing components with HYPER-FLEX performance polyurethane. By installing a complete set of ENERGY's performance polyurethane bushings you'll realize an incredible improvement in control-no matter what demand you put on your vehicle. ENERGY's control arm bushings will maintain proper caster and camber alignment throughout the suspension travel, without binding. The leaf spring bushings will deliver an increase in handling and control and greatly reduce wheel hop on quick acceleration. Even braking control is improved through better suspension stability.
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ENERGY SUSPENSION HYPER-FLEX SYSTEM: INTEGRA 94-01 (LS/GS/GSR) - $ 164.50

ENERGY SUSPENSION HYPER-FLEX SYSTEM: INTEGRA 94-01 (LS/GS/GSR)

	PRICE :$ 164.50 Energy Suspension, Hyper-Flex System (Polyurethane Bushing Master Set), for Acura Integra 94-01 (Exc. Type-R) Note: Available in Graphite (Black) or Red color. Please select color when order. Back by popular demand! ENERGY SUSPENSION reintroduces the HYPER-FLEX SYSTEM Performance Bushing Master Sets-for the most popular car and truck models, both import and domestic. Now, with just one part number you can replace all of the major suspension bushing components with HYPER-FLEX performance polyurethane. By installing a complete set of ENERGY's performance polyurethane bushings you'll realize an incredible improvement in control-no matter what demand you put on your vehicle. ENERGY's control arm bushings will maintain proper caster and camber alignment throughout the suspension travel, without binding. The leaf spring bushings will deliver an increase in handling and control and greatly reduce Wheel hop on quick acceleration. Even braking control is improved through better suspension stability. This set includes Front and rear control arm bushings, front and rear shock bushings, front end links, steering rack bushings (with power steering only), transmission shifter stabilizer bushings (manual transmission only), ball joint and tie rod end boots. This set does not include sway bar bushings due to the multiple sizes available for this vehicle. Sway bar bushings must be ordered separately.
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ENERGY TRAILING ARM BUSHING SET: PRELUDE 92-96 (REAR) - $ 58.50

ENERGY TRAILING ARM BUSHING SET: PRELUDE 92-96 (REAR)

PRICE :$ 58.50
Re-engineered Rear trailing arm bushings dramatically help the vehicle maintain proper rear Toe and caster under high performance driving conditions. Important when using larger-than-stock tires and wheels.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (BLACK) - $ 74.99

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (BLACK)

PRICE :$ 74.99

BLACKWORKS RACING Forged Aluminum Lug Nut set

AL7075 / 12 x 1.5MM thread pitch

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (GOLD) - $ 74.99

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (GOLD)

PRICE :$ 74.99

BLACKWORKS RACING Forged Aluminum Lug Nut set

AL7075 / 12 x 1.5MM thread pitch

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (RED) - $ 74.99

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (RED)

PRICE :$ 74.99

BLACKWORKS Racing Forged Aluminum Lug Nut set

AL7075 / 12 x 1.5MM thread pitch

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (PURPLE) - $ 74.99

BLACKWORKS RACING LUG NUT SET: 12X1.5 - 16 PCS (PURPLE)

PRICE :$ 74.99

BLACKWORKS RACING Forged Aluminum Lug Nut set

AL7075 / 12 x 1.5MM thread pitch

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ACL BEARING KIT: PRELUDE (H22A) - $ 99.99

ACL BEARING KIT: PRELUDE (H22A)

PRICE :$ 99.99
Includes: Honda B-Series Main Bearings, Honda B18A1/B1, B17A1 Rod Bearing, and Honda B/D-Series Thrust Bearing

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING THROTTLE BODY & TPS SENSOR: HONDA/ACURA (D16/B16/B18/B20/H22/F22) - $ 169.99

BLACKWORKS RACING THROTTLE BODY & TPS SENSOR: HONDA/ACURA (D16/B16/B18/B20/H22/F22)

PRICE :$ 169.99

High Flowing Large Bore Capable Of Supporting 500 HP
Gains As High As 10+ HP On Forced Induction Applications
Durable and Corrosion Resistant Hard Anodized Finish
Uses Factory Throttle Cable
Made from cast for an OEM look
Sealed Bearings For Smooth Operation
OEM MAP Sensor can be used

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING INTAKE MANIFOLD & THROTTLE BODY: CIVIC/CRX 88-00 (B16) - $ 294.90

BLACKWORKS RACING INTAKE MANIFOLD & THROTTLE BODY: CIVIC/CRX 88-00 (B16)

PRICE :$ 294.90

All Honda Civic, CRX
B16A, B (1.6L DOHC VTEC)

1992-1993 Acura Integra GSR
B17A (1.7L DOHC VTEC)
1997-2001 Acura Intega Type-R
B18C5 (1.8L DOHC VTEC)

The Blackworks Racing Performance Intake Manifold significantly improves the engine's overall flow characteristics compared to the factory unit. The latest aluminum casting technology allows our manifolds to create a smoother internal plenum. Maximum wave scavenging, and reduce the manifold's overall weight. All applications feature a larger plenum, with longer runners that have been balanced and tuned for peak power at higher RPM's.

All Blackworks Racing Performance Intake Manifolds accept factory or aftermarket throttle bodies, and reuse all factory sensors.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING INTAKE MANIFOLD & THROTTLE BODY: CIVIC/CRX 88-00 (D16) - $ 294.90

BLACKWORKS RACING INTAKE MANIFOLD & THROTTLE BODY: CIVIC/CRX 88-00 (D16)

PRICE :$ 294.90

1988-2000 Honda Civic, CRX, Del Sol
Honda D15B7, D16A-Z SOHC

All Blackworks Racing Performance Intake Manifolds accept factory or aftermarket throttle bodies, and reuse all factory sensors.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: INTEGRA 94-01 (LS/GS/GSR) - $ 609.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: INTEGRA 94-01 (LS/GS/GSR)

PRICE :$ 609.99

BWR SUSPENSION, SS TYPE
Provides the height adjustable, damping force not adjustable suspension. With alloy forged aluminum correspondent with anodized finish brackets, spring seats and upper mounts (Some of BWR suspension come with upper mounts but some are not.). Serving the good tuning and the shining appearance for enjoying driving.
* SS: The SS type comes with height adjustable & Lower damping forces for NORMAL STREET use. It drops car to get performance appearance but in a comfortable ride experiences. Height is adjusted from the lower mounting bracket.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: INTEGRA 90-93 - $ 609.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: INTEGRA 90-93

PRICE :$ 609.99

BWR SUSPENSION, SS TYPE

Provides the height adjustable, damping force not adjustable suspension. With alloy forged aluminum correspondent with anodized finish brackets, spring seats and upper mounts (Some of BWR suspension come with upper mounts but some are not.). Serving the good tuning and the shining appearance for enjoying driving.

* SS: The SS type comes with height adjustable & Lower damping forces for NORMAL STREET use. It drops car to get performance appearance but in a comfortable ride experiences. Height is adjusted from the lower mounting bracket

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: CIVIC 92-95 - $ 609.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: CIVIC 92-95

PRICE :$ 609.99

BWR SUSPENSION, SS TYPE

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: CIVIC 96-00 - $ 609.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: CIVIC 96-00

PRICE :$ 609.99

BWR SUSPENSION, SS TYPE

* SS: The SS type comes with height adjustable & lower damping forces for NORMAL STREET use. It drops car to get performance appearance but in a comfortable ride experiences. Height is adjusted from the lower mounting bracket

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: S2000 00-06 - $ 609.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: S2000 00-06

PRICE :$ 609.99

BWR SUSPENSION, SS TYPE
Provides the height Adjustable, damping force not adjustable suspension. With alloy forged aluminum correspondent with anodized finish brackets, spring seats and upper mounts (Some of BWR suspension come with upper mounts but some are not.). Serving the good tuning and the shining appearance for enjoying driving.
* SS: The SS type comes with height adjustable & lower damping forces for NORMAL STREET use. It drops car to get performance appearance but in a comfortable ride experiences. Height is adjusted from the lower mounting bracket.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: PRELUDE 92-01 - $ 639.99

BLACKWORKS RACING "BWR" FULL COILOVER SUSPENSION: PRELUDE 92-01

PRICE :$ 639.99

BWR SUSPENSION, SS TYPE
Provides the height adjustable, damping force not adjustable suspension. With alloy forged aluminum correspondent with anodized finish brackets, spring seats and upper mounts (Some of BWR suspension come with upper mounts but some are not.). Serving the good tuning and the shining appearance for enjoying driving.
* SS: The SS type comes with height adjustable & lower damping forces for NORMAL STREET use. It drops car to get performance appearance but in a comfortable ride experiences. Height is adjusted from the lower mounting bracket.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (BLUE) - $ 577.30

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (BLUE)

PRICE :$ 577.30
JDM Mitsubishi (Japan Version) O.E. Lancer EVO IX Rear Bumper Cover (Blue),
for U.S. Mitsubishi Lancer EVO 03-06
Note: Built-in Air Diffuser

*THIS ITEM CAN ONLY BE SHIPPED VIA TRUCK FREIGHT SERVICE. YOUR SALESPERSON WILL CONTACT YOU WITH THE CORRECT SHIPPING COST*

JDM EVO IX rear bumper providing a sporty look and Function in one package with its built in air diffuser, which is designed for pure racing purposes. Imported directly from Mitsubishi Japan, this urethane bumper provide exceptional quality, fit, and finish you would expect. Factory paint in blue.

Note: Some modification required for installation to U.S. version Evolution. Comes with complete rivets and tow hook cover.

You can visit www.evolutionm.net for more detail information on the installation

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (WICKED WHITE) - $ 577.30

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (WICKED WHITE)

PRICE :$ 577.30
JDM Mitsubishi (Japan Version) O.E. LANCER EVO IX Rear Bumper Cover (Wicked White),
for U.S. Mitsubishi Lancer EVO 03-06
Note: Built-in Air Diffuser

*THIS ITEM CAN ONLY BE SHIPPED VIA TRUCK FREIGHT SERVICE. YOUR SALESPERSON WILL CONTACT YOU WITH THE CORRECT SHIPPING COST*

JDM EVO IX rear bumper providing a sporty look and function in one package with its built in air diffuser, which is designed for pure racing purposes. Imported directly from Mitsubishi Japan, this urethane bumper provide exceptional quality, fit, and finish you would expect. Factory paint in white.

Note: Some modification required for installation to U.S. version Evolution. Comes with complete rivets and tow hook cover.

You can visit www.evolutionm.net for more detail information on the installation

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (BLACK) - $ 577.30

JDM LANCER EVO-9 REAR BUMPER W/DIFFUSER (BLACK)

PRICE :$ 577.30
JDM Mitsubishi (Japan Version) O.E. Lancer EVO IX Rear Bumper Cover (Black),
for U.S. Mitsubishi Lancer EVO 03-06
Note: Built-in Air Diffuser

*THIS ITEM CAN ONLY BE SHIPPED VIA TRUCK FREIGHT SERVICE. YOUR SALESPERSON WILL CONTACT YOU WITH THE CORRECT SHIPPING COST*

JDM EVO IX rear bumper providing a sporty look and Function in one package with its built in air diffuser, which is designed for pure racing purposes. Imported directly from Mitsubishi Japan, this urethane bumper provide exceptional quality, fit, and finish you would expect. Factory paint in black.

Note: Some modification required for installation to U.S. version Evolution. Comes with complete rivets and tow hook cover.

You can visit www.evolutionm.net for more detail information on the installation

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

JDM HONDA WINDOW VISOR: INTEGRA 94-01 (SEDAN) - $ 204.50

JDM HONDA WINDOW VISOR: INTEGRA 94-01 (SEDAN)

PRICE :$ 204.50
This sleek aerodynamic styling and quality window visor set is a factory HONDA optional item only available in Japan. It is designed to fit Acura Integra 94-01 4 door models. It is made of reinforced acrylic in dark smoke gray color. This window visors reduce wind noise and keeps the rain out while letting fresh air into your ride. Also helps to reduce heat buildup in parked vehicles on a sunny day. Comes with complete mounting instructions for a do-it-yourself installation

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

B&M SPORT SHIFTER: 240SX 89-98 - $ 202.50

B&M SPORT SHIFTER: 240SX 89-98

PRICE :$ 202.50

B&M Presicion Sport Shifter For Nissan 240SX w/SR20 Engine (US) 88-99, 180SX/200SX (Non-US) 88-99, Skyline RB20 Non-Turbo Engine, Pulsar GTiR 91-94
Note: 40% Reduction

B&M's Short Throw Manual Shifters are CAD-designed and engineered direct bolt-in replacement shifters. The only tools needed to install it are simple hand tools! Working with some of the top import racers, B&M's engineers took what they learned in the real world racing enviroment and designed a professional grade shifter. By designing in a key features that makes these shifters the absolute best you can buy (such as counterbalanced bottom end) and incorporating a billet aluminum bearing mount (with a trick aerospace polymer spherical bearing), B&M Short Throw Shifters have become the professional's choice. Threaded for use with both factory and aftermarket knobs, these shifters feature counter-balanced bottom ends for more precise shifts. Extremely tight tolerances and special, long-lasting high performance bushings or pivot locations make B&M Short Throw Shifters the smoothest, most accurate shifters available. The CNC machined, super-tough 303 billet stainless steel shafts provide the absolute best leverage and reduces shift throw! B&M offers you a lifetime warrenty. If performance means everything to you, let B&M give out the edge!

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

FIDANZA SHORT SHIFTER: 350Z 03-UP - $ 85.49

FIDANZA SHORT SHIFTER: 350Z 03-UP

PRICE :$ 85.49
There are so many short throw shifters on the market, however, only Fidanza has a shifter available that stands out amongst all others. These shifters are made from the highest quality aluminum and hardened steel, Three dimensional imaging and machining are used to get the finest profile for fit and funtionality. That's why we say, the shorter the throw tge quicker you go. Fidenza will get you to the finish line first.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TENZO SHORT SHIFT KIT: CIVIC 88-95 & INTEGRA 90-93 - $ 27.99

TENZO SHORT SHIFT KIT: CIVIC 88-95 & INTEGRA 90-93

PRICE :$ 27.99

Tenzo Short Throw Shifter (Polished) - Single Bend
for HONDA Civic 88-95 and Acura Integra 90-93

Tenzo Short Throw Shifters are specially designed to reduce the throw by as much as 35% to 40% for quick, gear shifting response. The low handle design and colored finishes add a tuning theme to your interior

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TENZO SHORT SHIFT KIT: INTEGRA 94-01 & CIVIC 96-00 - $ 27.99

TENZO SHORT SHIFT KIT: INTEGRA 94-01 & CIVIC 96-00

PRICE :$ 27.99

Tenzo Short Throw Shifter (Polished)
for Acura Integra 94-01 and Honda Civic 96-00

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING TEST PIPE: S2000 - $ 119.99

SKUNK2 RACING TEST PIPE: S2000

PRICE :$ 119.99
SKUNK2 Test Pipe Honda S2000 (70mm)- P/N: 414-05-0070

Product Model: SK2-414-05-0070

Skunk2 test pipes are designed to dramatically improve engine performance and increase horsepower by significantly reducing exhaust flow restriction. Made from mandrel-bent aircraft quality 304 stainless steel and precision TIG welded. SKUNK2 test pipes features a sensor bung, heavy-duty flanges, and Skunk2 Racing acidetched stainless steel badge. Ideal for highly modified N/A and Forced Induction applications. Mounting hardware and bung plug included.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING TEST PIPE: CIVIC/CRX 88-91 & CIVIC H/B 92-95 - $ 104.99

SKUNK2 RACING TEST PIPE: CIVIC/CRX 88-91 & CIVIC H/B 92-95

PRICE :$ 104.99
Test pipes are designed to replace the vehicle's fatory catalytic converter which significantly improves EXHAUST flow. All test pipes and down pipes are properly sized to maximize power and torque. Both are manufatured from aircraft quality T304 stainless steel.

FOR OFF-ROAD USE ONLY. NEVER TO BE USED ON PUBLIC HIGHWAYS OR ON POLLUTION CONTROLLED VEHICLES.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING TEST PIPE: CIVIC EX 96-00/CIVIC SI 99-00 - $ 104.99

SKUNK2 RACING TEST PIPE: CIVIC EX 96-00/CIVIC SI 99-00

PRICE :$ 104.99

Skunk2 Racing Stainless Steel Test Pipe, for Honda CIVIC EX 96-00 & Civic Si 99-00

Test pipes are designed to replace the vehicle's fatory catalytic converter which significantly improves exhaust flow. All test pipes and down pipes are properly sized to maximize power and torque. Both are manufatured from aircraft quality T304 stainless steel.

FOR OFF-ROAD USE ONLY. NEVER TO BE USED ON PUBLIC HIGHWAYS OR ON POLLUTION CONTROLLED VEHICLES.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING TEST PIPE: INTEGRA GS-R 94-99 - $ 104.99

SKUNK2 RACING TEST PIPE: INTEGRA GS-R 94-99

PRICE :$ 104.99

Skunk2 Racing Stainless Steel Test Pipe, for Acura Integra GS-R 94-99

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING TEST PIPE: INTEGRA LS/RS 94-01/TYPE-R 97-00 - $ 104.99

SKUNK2 RACING TEST PIPE: INTEGRA LS/RS 94-01/TYPE-R 97-00

PRICE :$ 104.99

Skunk2 Racing Stainless Steel Test Pipe, for Acura Integra LS/RS 94-01 and Integra Type (US) 97-00

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA STAINLESS STEEL TEST-PIPE: LANCER EVO 03-06 - $ 119.49

ICHIBA STAINLESS STEEL TEST-PIPE: LANCER EVO 03-06

PRICE :$ 119.49

ICHIBA Stainless Steel Test-Pipe for Mitsubishi Lancer EVO 03-06

- 3" Stainless Steel Polished Piping
- Tuned for all-out performance for Racing applications only
- NOT C.A.R.B. exempt / Off Road Only
- CAD-rendered design eases installation
- CNC Machined Flanges with Mandrel bent tubing
- Increase air flow & performance with noticeable improvements
- Direct bolt-on with all installation accessories
- Each product comes with one year warranty

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

ICHIBA STAINLESS STEEL TEST-PIPE: LANCER EVO 2008 - $ 144.50

ICHIBA STAINLESS STEEL TEST-PIPE: LANCER EVO 2008

PRICE :$ 144.50
- 3" Stainless Steel Polished Piping
- Tuned for all-out performance for Racing applications only
- NOT C.A.R.B. exempt / Off Road Only
- CAD-rendered design eases installation
- CNC Machined Flanges with Mandrel bent tubing
- Increase air flow & performance with noticeable improvements
- Direct bolt-on with all installation accessories
- Each product comes with one year warranty

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

P2R THERMAL THROTTLE BODY GASKET: ACURA RSX 02-06 TYPE-S - $ 19.99

P2R THERMAL THROTTLE BODY GASKET: ACURA RSX 02-06 TYPE-S

PRICE :$ 19.99

Power Rev RACING Thermal Intake Gaskets will help reduce intake air temps by removing the direct connection of the intake Manifold to the cylinder head. By placing this thermal gasket between the intake MANIFOLD and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

P2R THERMAL THROTTLE BODY GASKET: CIVIC SI 02-05 - $ 19.99

P2R THERMAL THROTTLE BODY GASKET: CIVIC SI 02-05

PRICE :$ 19.99
Power Rev RACING Thermal Intake Gaskets will help reduce intake air temps by removing the direct connection of the INTAKE MANIFOLD to the cylinder head. By placing this thermal Gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

P2R THERMAL THROTTLE BODY GASKET: CIVIC SI 06-09 - $ 19.99

P2R THERMAL THROTTLE BODY GASKET: CIVIC SI 06-09

PRICE :$ 19.99

Power Rev RACING Thermal Intake Gaskets will help reduce intake air temps by removing the direct connection of the intake manifold to the cylinder head. By placing this thermal gasket between the intake manifold and the cylinder head, you will help reduce the amount of heat soak the intake manifold normally absorbs from the cylinder head.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

P2R THERMAL THROTTLE BODY GASKET: HONDA S2000 00-05 - $ 19.99

P2R THERMAL THROTTLE BODY GASKET: HONDA S2000 00-05

PRICE :$ 19.99

*Only models with THROTTLE Cable

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

P2R THERMAL THROTTLE BODY GASKET: ACURA TL 04-08 - $ 19.99

P2R THERMAL THROTTLE BODY GASKET: ACURA TL 04-08

PRICE :$ 19.99

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

HOTCHKIS END LINK SET: WRX 02-06 (SEDAN) - $ 221.99

HOTCHKIS END LINK SET: WRX 02-06 (SEDAN)

PRICE :$ 221.99

Hotchkis - Competition End Link Set (Front + Rear), for Subaru Impreza WRX 02-06 (Sedan Only)

Don't risk breaking your Sway Bar end links on your WRX. This common problem is easily solved with the Hotchkis Tuning End links. The front features high articulation ball joint end links (not currently pictured), while the back utilizes a cnc machined link with quiet, greasable polygraphite bushings.

Note: Will Not Fit Some Models with "Dog-Bone" Style Front Links. Most commonly used on wagons

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

HOTCHKIS END LINK SET: WRX STI 04-07 - $ 173.50

HOTCHKIS END LINK SET: WRX STI 04-07

PRICE :$ 173.50

Hotchkis - Competition End Link Set (Front + Rear), for Subaru Impreza WRX STi 04-07

Upgrade your stock end links with our high articulation ball joint end links.(not currently pictured) These links are more durable than the stock links which are prone to breakage with stiff aftermarket bars

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

HOTCHKIS END LINK SET: RSX 02-04 - $ 173.50

HOTCHKIS END LINK SET: RSX 02-04

PRICE :$ 173.50

Hotchkis - Competition End Link Set (Front + Rear), for Acura RSX 02-04 & Subaru Impreza WRX STi 04-07
Note: Will not fit RSX 05-06

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AEM COLD AIR INTAKE: ACCORD V6 08-UP - $ 305.99

AEM COLD AIR INTAKE: ACCORD V6 08-UP

	PRICE :$ 305.99 AEM - Cold Air Intake, for Honda Accord V6 08-Up (will fit manual & automatic transmission) Note: Available in Silver or Polished Piping. Please select color when ordering. AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump). AEM also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. AEM Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction in their fit and performance that they guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Manufactured and assembled in the USA * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware Kit with soft mounts for a guaranteed perfect fit * AEMs lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license plate frame included * Guaranteed for life
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

INJEN COLD AIR INTAKE: ACCORD COUPE V6 08-09 (AUTO) - $ 277.40

INJEN COLD AIR INTAKE: ACCORD COUPE V6 08-09 (AUTO)

	PRICE :$ 277.40 Note-1: Gains of up to 10.9hp & 9.42ft/lbs of torque. Note-2: Available in Polish and Glossy Black, Please specify color when ordering. Harness the Power! Unleash all 11 ponies and 9 Ft./Lbs of torque from your 4 cylinder Accord! Superior and unparalleled technology is what goes into the all new SP1675. injen's patented, MR step down process calibrates air/fuel ratios, while Air Fusion adjusts short term, ling term fuel trim levels to factory spec's. Complementing this Innovative technology, is the Injen/AMSOIL Ea nano-fabric No-Oil-required dry filter, the filter of the future! With all this advanced engineering going into an intake, why settle for less? Choose the Intake tuners of today and tomorrow! Go with Injen Technology!
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TAKEDA COLD AIR INTAKE: TL (3.2L) 04-08 - $ 220.50

TAKEDA COLD AIR INTAKE: TL (3.2L) 04-08

PRICE :$ 220.50

Gains 7HP & 14Ft/Lbs of Torque

Attack is the Takeda Cold Air lineup. These intakes put the Filter behind the front bumper, where the intake can ingest cold, dense air. All Attack version intakes come complete with Takeda's Synthetics Pre-Filter.

Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TAKEDA COLD AIR INTAKE: TSX 08-09 - $ 271.50

TAKEDA COLD AIR INTAKE: TSX 08-09

PRICE :$ 271.50

Note: can be converted into a short ram intake

Link is the Takeda Conversion lineup. These intakes are COLD air intakes that can be converted into a short ram intake, simply be removing the secondary portion of the intake system and relocating the filter to the primary intake tube. All Link version intakes come complete with Takeda's Synthetics Pre-Filter.

Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

AEM COLD AIR INTAKE: SCION xB 04-06 - $ 241.50

AEM COLD AIR INTAKE: SCION xB 04-06

	PRICE :$ 241.50 AEM pioneered the Cold Air induction system for sport compact cars in 1994. A Cold Air intake system relocates the filter outside of the engine compartment to deliver the coolest air inlet temperatures possible. Cooler air carries more oxygen, which translates into a more intense explosion in the combustion chamber to create more horesepower and torque. But that's only part of the power equation. Tuning the inlet pipe in length and diameter to match the engine's resonance helps move more air to the cylinders (think of your engine as a big air pump). AEM also monitor fuel trim correction factors and all OBDII sensors during R&D to eliminate leaning the engine out and/or throwing a check engine light. AEM Cold Air systems are dyno-proven and tested against the competition to create more useable power than any other system of their kind. Every AEM Cold Air induction system features the highest standards of construction in their fit and performance that they guarantee them for the life of your vehicle. All AEM Cold Air systems are either 50-state legal or pending (excluding "Off Road" and "Hybrid" systems), include a lifetime DRYFLOW Synthetic air filter and come with a limited lifetime warranty. * Manufactured and assembled in the USA * Inlet constructed of lightweight aircraft aluminum and mandrel bent for maximum flow * Reinforced TIG-welded brackets and fittings deliver added durability * Utilizes a complete hardware Kit with soft mounts for a guaranteed perfect fit * AEMs lifetime DRYFLOW Synthetic air filter is 99.4% efficient, filters to one micron, and never needs filter oil! * Comprehensive installation instructions, decals and license Plate Frame included * Available powdercoated in red, blue or silver, or with a mirror-polished finish * Guaranteed for life
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

TAKEDA COLD AIR INTAKE: SCION xB 08-09 - $ 227.60

TAKEDA COLD AIR INTAKE: SCION xB 08-09

PRICE :$ 227.60

Note: can be converted into a short ram intake

Link is the Takeda Conversion lineup. These intakes are cold air intakes that can be converted into a short ram intake, simply be removing the secondary portion of the intake system and relocating the filter to the primary intake tube. All Link version intakes come complete with Takeda's Synthetics Pre-Filter.

Takeda Air Intake Systems use a revolutionary new Pro Dry S Filter Media that works without filter oil. This media is easier and faster to clean than traditional foam, and requires no costly and messy solvents or oils. Takeda filters can be cleaned in a matter of minutes and are ready to use after only a couple of hours of drying time. Unlike pre-oiled or disposable filters, Takeda Filters are Lifetime Filters that will last as long as you own your vehicle

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RACING VALVE SPRINGS: H22A DOHC VTEC - $ 204.99

SKUNK2 RACING VALVE SPRINGS: H22A DOHC VTEC

PRICE :$ 204.99

Skunk 2 Racing - Racing Valve Springs (Set of 16) for Honda H22A (2.2 DOHC VTEC) Engine. Seat Pressure=100lbs@1.400", Open Pressure=240lbs@0.5", Max. Lift=0.53"

Skunk2 Racing valve springs are made from the highest quality chrome silicone wire from Japan. These valve springs are designed from our experiences in touring car and drag racing. The dual interference fit valve spring design prevents harmonics and valve float. All valve springs are race tested and proven and can be used with both forced induction and naturally aspirated engines.

Note: Spring base Kit required for engines originally equipped with single valvesprings. Parts # 312-05-0015. SOLD SEPARATELY.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 TUNER SERIES DUAL VALVE SPRINGS: S2000 00-UP (2.0L/2.2L) - $ 244.99

SKUNK2 TUNER SERIES DUAL VALVE SPRINGS: S2000 00-UP (2.0L/2.2L)

PRICE :$ 244.99

Skunk 2 Racing - Tuner Series Dual Valve Springs (Set of 16), for Honda S2000 (2.0L/2.2L) 00-Up

Skunk2 Racing valve springs are made from the highest quality chrome silicone wire from Japan. These valve springs are designed from our experiences in touring car and drag racing. The dual interference fit valve spring design prevents harmonics and valve float. All valve springs are race tested and proven and can be used with both forced induction and naturally aspirated engines.

Note: Spring base kit required for engines originally equipped with single valvesprings. Parts # 312-05-0010. SOLD SEPARATELY

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 REAR LOWER CONTROL ARM: RSX 02-06 (PAIR/ STEEL BLUE) - $ 197.69

SKUNK2 REAR LOWER CONTROL ARM: RSX 02-06 (PAIR/ STEEL BLUE)

PRICE :$ 197.69

Skunk2 Rear Lower Control Arm (1 Pair)
for RSX 02-06

Ideal for street and race applications, Skunk2 Rear Lower Control Arms replace your stock arms while retaining factory suspension geometry. The Skunk2 Rear Lower Control Arms are forged from aircraft quality AL2024 billet aluminum, precision CNC machined and are over 25% lighter than stock arms. Skunk2 Lower Control Arms feature adjustable sway bar mounting holes so you can fine tune the feel and balance of the rear suspension, and also feature low deflection polyurethane bushing which act as bearings for quicker response and a more positive feel. By allowing the arm to rotate freely about the bushing, Skunk2 eliminated the tearing and unseating commonly found with fixed rubber bushings. Skunk2 Lower Control Arms are available in JDM Gold or Hard Anodized Finishes

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 REAR LOWER CONTROL ARM: RSX 02-06 (PAIR/GOLD) - $ 197.69

SKUNK2 REAR LOWER CONTROL ARM: RSX 02-06 (PAIR/GOLD)

PRICE :$ 197.69

Skunk2 Rear Lower Control Arm (1 Pair)
for RSX 02-06

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 REAR LOWER CONTROL ARM: CIVIC 88-95 /INTEGRA 90-01 (PAIR/BLACK) - $ 224.89

SKUNK2 REAR LOWER CONTROL ARM: CIVIC 88-95 /INTEGRA 90-01 (PAIR/BLACK)

PRICE :$ 224.89

Skunk2 - Limited Edition Rear Lower Control Arm (1 Pair / Flat Black with Red Bushings)
for Honda Civic 88-95, CRX 88-91, Del Sol 92-97, & Acura Integra 90-01

The ultimate in stealth suspension modifications Skunk2s limited edition, Black Series, hard-anodized Rear Lower Control Arms.

Each limited edition Black Series Rear Lower Control Arm features Skunk2s signature black look in an anodized coating and is serialized for authenticity. This exclusive run is currently available for the 92-95 Civic, 96-00 Civic, and 94-01 Integra and is paired with red, low-deflection, polyurethane bushings for the ultimate contrast.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS