ENERGY SHIFTER BUSHINGS: CIVIC/INTEGRA (B16/B18) - USD 12.99

ENERGY SHIFTER BUSHINGS: CIVIC/INTEGRA (B16/B18)

	PRICE :USD 12.99 ENERGY SHIFTER BUSHINGS: CIVIC/INTEGRA (B16/B18) Energy Suspension Manual Transmission Shifter Stabilizer Bushing Set (Red) for Acura Integra 90-01, Honda Civic/CRX 84-87, Civic Si 99-00, Del Sol VTEC 93-97 The Shift Stabilizer Bushing will improve the shift feel and responsiveness on your vehicles This easily installed kit eliminates the soft rubber factory change extension bushings. Our anodized rear shifter mount replaces the soft, spongy, factory rubber mount and is precision engineered to remove all flexing common to rubber and plastic type bushings which lead to shifter movement and miss shifts. This system will work with the factory shifter and other aftermarket shifters.
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

MEGAN RACING OE-TYPE SEAT BELT HARNESS: UNIVERSAL - USD 54.60

MEGAN RACING OE-TYPE SEAT BELT HARNESS: UNIVERSAL

PRICE :USD 54.60
Megan Racing 4 Point Seat Belt Harnesses, featuring 2" nylon webbing, quick release buckle for easy entry and exit, designed for comfort, support, and safety during hard cornering and aggressive driving. Extra wider pads on chest and legs will make more comfortable driving experience or while racing on tracks.

Color - Black with Red wider pads

Feature - 4 points, with Press to release function

Universal fitment, fits all seats and cars and trucks.

** This set up is for one seat only, for either passenger side or drivier side

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

INNOVATIVE MOTOR MOUNTS: CIVIC/CRX 88-91 (B-SERIES/HYDRO) - USD 289.00

INNOVATIVE MOTOR MOUNTS: CIVIC/CRX 88-91 (B-SERIES/HYDRO)

	PRICE :USD 289.00 Innovative Steel Engine Mount Kit for Honda Civic/CRX 88-91 (B series motor conversion with hydraulic transmission) Note 1: Black wrinkle powdercoat. Note 2: Front mount not included. Note 3: Please select color for appropriate horsepower Conversion mount kit for 1988-1991 Honda Civic or CRX. Designed to fit all B-Series motors with hydraulic transmission. Positions the motor with no axle bind. Unique no-tear vibration minimizing bushings. Actuator pivots smoothly using state of the art spherical bearings. The actuator is mounted in the same fashion as the factory models and works in the same plane as the clutch release fork. There is no binding in the cluth release fork and therefore no premature clutch wear caused by the actuator. CAD/CAM Designed. Stress Analyzed. Lifetime warranty. 60A Bushings: Red, good up to 250HP MAX 75A Bushings: Black, good up to 500HP MAX 85A Bushings: Gray, good for 500+HP Note: Please select bushing hardness when order
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SPOON RESERVOIR TANK COVER: BLUE (SET OF 2) - USD 19.00

SPOON RESERVOIR TANK COVER: BLUE (SET OF 2)

PRICE :USD 19.00
Spoon Sports Reservoir Tank Cover (2 Piece Set), for Brake & Clutch Reservoir.
Fits most Honda & Acura Engines

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

NRG INNOVATION CAM LOCK 4-POINT SEAT HARNESS: UNIVERSAL (BLACK) - USD 77.90

NRG INNOVATION CAM LOCK 4-POINT SEAT HARNESS: UNIVERSAL (BLACK)

PRICE :USD 77.90
All the features and capabilities of the street harness but with competition strength with an even heavier duty steel cam ﾖlock type buckle. Nylon belts are also double reinforced for pure competition driving purposes.

Features: Double reinforced high grade nylon 2in. width with Steel Buckle for competition purposes

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

SKUNK2 RESERVOIR TANK COVER (1-PIECE) - USD 9.00

SKUNK2 RESERVOIR TANK COVER (1-PIECE)

	PRICE :USD 9.00 Skunk2 Brake Reservoir Covers help prevent leakage from brake and clutch reservoirs. They are designed to absorb brake fluid that may escape from the master brake cylinder under hard braking which can spill into the engine bay or onto the racetrack. Skunk2 Brake Reservoir are fire retardant to help protect master reservoirs from engine fires. * Absorbs brake fluid that may escape from master cylinder under hard braking. * Prevents brake fluid from spilling into engine bay or onto the racetrack. * Made of fire resistant material
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BLOX 70mm THROTTLE BODY: B16 B18 H22 F22 D16 - USD 255.00

BLOX 70mm THROTTLE BODY: B16 B18 H22 F22 D16

	PRICE :USD 255.00 BLOX 70mm THROTTLE BODY: B16 B18 H22 F22 D16 Note: Includes Throttle Position Sensor BLOX Racing billet throttle bodies are currently available for the Honda and Acura D, B, and H-series engines. Each unit is precision machined from AL6061 and features new brass throttle plates, stiffer throttle springs and sealed bearings for quick responses and smooth operation. These high performance throttle bodies are designed as direct-fit replacements and come in various sizes ranging from 66mm to 76mm openings. BLOX Racing billet throttle bodies offer increases in airflow characteristics resulting in horsepower and torque gains
CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

RANDOM TECHNOLOGY HI-FLOW CAT: RSX TYPE-S 02-04 - USD 359.00

RANDOM TECHNOLOGY HI-FLOW CAT: RSX TYPE-S 02-04

PRICE :USD 359.00
For years, it has been a common belief that all catalytic converters place a choke-hold on performance. In 1993, Random Technology disproved that theory with the introduction of Super High Flow catalytic converters. Direct-fit, bolt-in Super High Flow converters are available for most vehicles. This design, which meets Federal EPA and California ARB requirements, enables virtually any vehicle with a properly tuned engine to meet emissions standards with little, if any power loss (compared to an exhaust with no catalytic converter) In fact, Random Technology catalytic converters actually have a higher flow capacity than most mufflers. As an example, a 3" diameter Super High Flow converter flows 501cfm. Most 3" diameter high performance mufflers flow less than 475 cfm at the same test pressure. Random Technology direct fit Super High Flow catalytic converters are now available for most domestic and imported vehicles. Custom catalytic converters with inlets and outlet up to 4" in diameter are available. Independent testing by engine builders, racers, and automotive magazines has repeatedly proven the superiority of the Random Technology Super High Flow design.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

BWR (TPS) THROTTLE POSITION SENSOR: HONDA B/D/F/H SERIES - USD 29.99

BWR (TPS) THROTTLE POSITION SENSOR: HONDA B/D/F/H SERIES

PRICE :USD 29.99

New Honda or Acura replacement Throttle Position Sensor - Honda & Acura T.P.S

Don't risk buying a used throttle position sensor and purchase for much less than the OEM part from your local Honda or Acura dealer. The Honda or Acura dealer will charge approximately $500.00 to $600.00 for the throttle body assembly.

Applications:
1990 to 1991 Acura Integra XSI / RSI ( JDM ) B16
1992 to 1993 Acura Integra XSI / RSI B16
1992 to 1993 Acura Integra GSR B17A1
1990 to 1993 Acura Integra GS B18A1
1994 to 2000 Acura Integra GS LS RS B18B1
1995 to 1997 Acura Integra SiR ( JDM ) B18C
1994 to 2001 Acura Integra GSR B18C1
1995 to 1998 Acura Integra Type R B18C3
1997 to 2001 Acura Integra Type R B18C5
1988 to 1989 Acura Integra D16A1
1988 to 1989 Acura Integra D16A3
1988 to 1989 Acura Integra D16A8 / D16A9
1990 to 1993 Acura Integra ZC

1990 to 1993 Honda Accord 2.0 SI ( JDM ) F20A
1990 to 1993 Honda Accord F22A1
1990 to 1993 Honda Accord F22A4
1991 to 1993 Honda Accord F22A6
1994 to 1997 Honda Accord EX F22B1
1994 to 1997 Honda Accord DX / LX F22B2
1994 to 1997 Honda Accord SiR H22

1992 to 1996 Honda Del Sol SiR B16A
1993 to 1995 Honda Del Sol ( JDM ) B16A2
1992 to 1995 Honda Del Sol B16A3
1992 to 1995 Honda Del Sol Si D16Z6

1992 to 1996 Honda CRX SiR ( JDM ) B16A
1990 to 1991 Honda CRX SiR B16A1
1988 to 1991 Honda CRX HF D15B6
1988 to 1991 Honda CRX Si D16A6
1989 to 1992 Honda CRX Si 1.6L ( JDM ) ZC

1997 to 1998 Honda CRV B20B
1998 to 2001 Honda CRV B20Z

1992 to 1995 Honda Civic DX LX D15B7
1992 to 1995 Honda Civic CX D15B8
1996 to 2000 Honda Civic HX D16Y5
1996 to 2000 Honda Civic LX DX D16Y7
1992 to 1995 Honda Civic VX D15Z1
1988 to 1991 Honda Civic EX Si D16A6
1996 to 2000 Honda Civic EX D16Y8
1992 to 1995 Honda Civic EX Si D16Z6
1989 to 1991 Honda Civic SiR ( JDM ) B16A
1996 to 2000 Honda Civic VTi B16A
1989 to 1992 Honda Civic SiR ( JDM - Hach ) B16A
1990 to 1991 Honda Civic SiR ( JDM ) B16A
1999 to 2000 Honda Civic Si B16A2
1988 to 1991 Honda Civic Si ( JDM ) ZC
1992 to 1995 Honda Civic SiR II B16A2
1998 to 2001 Honda Civic Type R ( JDM ) B16B

1992 to 1996 Honda Prelude Si F22
1992 to 1996 Honda Prelude S F22A1
1992 to 1996 Honda Prelude VTEC H22
1997 to 2001 Honda Prelude SiR ( JDM ) H22A
1999 to 2001 Honda Prelude H22A
1997 to 2001 Honda Prelude Type S ( JDM ) H22A
1997 to 1998 Honda Prelude H22A1
1993 to 1996 Honda Prelude VTEC ( USDM ) H22A1
1997 to 2001 Honda Prelude ( USDM ) H22A4
1993 to 1995 Honda Prelude Type S ( JDM ) H23
1992 to 1996 Honda Prelude SE Si H22A1

NOTE: This throttle position sensor TPS will not fit the 1988 to 1991 stock Honda Civic LX DX & Honda CRX models.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

JDM STYLE LICENSE PLATE RELOCATOR: HONDA / ACURA / LEXUS / SUBARU - USD 19.99

JDM STYLE LICENSE PLATE RELOCATOR: HONDA / ACURA / LEXUS / SUBARU

PRICE :USD 19.99

One cool thing this relocator does, is, moves the license plate out of the way of your radiator or intercooler allowing more air to help cool your engine!

Move your license plate off to the side to allow better air flow to your radiator or intercooler with this universal relocator.

ADD TO CART

CLICK HERE FOR MORE DETAILS ABOUT THIS PRODUCTS

Most Popular Products in Stores

ENERGY SHIFTER BUSHINGS: CIVIC/INTEGRA (B16/B18) - USD 12.99

MEGAN RACING OE-TYPE SEAT BELT HARNESS: UNIVERSAL - USD 54.60

INNOVATIVE MOTOR MOUNTS: CIVIC/CRX 88-91 (B-SERIES/HYDRO) - USD 289.00

SPOON RESERVOIR TANK COVER: BLUE (SET OF 2) - USD 19.00

NRG INNOVATION CAM LOCK 4-POINT SEAT HARNESS: UNIVERSAL (BLACK) - USD 77.90

SKUNK2 RESERVOIR TANK COVER (1-PIECE) - USD 9.00

BLOX 70mm THROTTLE BODY: B16 B18 H22 F22 D16 - USD 255.00

RANDOM TECHNOLOGY HI-FLOW CAT: RSX TYPE-S 02-04 - USD 359.00

BWR (TPS) THROTTLE POSITION SENSOR: HONDA B/D/F/H SERIES - USD 29.99

JDM STYLE LICENSE PLATE RELOCATOR: HONDA / ACURA / LEXUS / SUBARU - USD 19.99